Project: Jacob Potter's home, West Linn, OR

A Wired Wi-Fi Upgrade for a West Linn Home

For Jacob Potter's home in West Linn, we put in two access points, both upstairs, each on its own new Cat6 cable, ran a wired line to the office nook, and set up a new gateway, a network switch and a rack in the garage. The same job added cameras.

November 2026 · Fixed-price quote · Two runs added to the job, at the same $499 rate

UniFi access point with its blue light ring lit, one of the two Velara installed upstairs in a West Linn home
  • WhereWest Linn, OR
  • WhenNovember 2026
  • Network2 access points, 4 new Cat6 runs
  • Home rates$499 a run, $99 to mount, $99 to set up

What we installed

  1. Two access points, both upstairs, each on its own new Cat6 run back to the network, so neither depends on a wireless hop. The photo at the top shows one of them, a UniFi unit.
  2. A new Cat6 data line to the office nook, for a wired connection there.
  3. A Cat6 run that ties the garage into the same network.
  4. Every run wired, sealed where it passes through, tested and labeled.
  5. A new gateway, the router that runs the network. It's also the way in when the Wi-Fi needs checking or tuning remotely.
  6. A network switch that feeds the Ethernet drops and powers the cameras.
  7. A network rack in the garage that holds the equipment.
  8. Mounting both access points, and setting up the router and both access points.

Why each access point has its own cable

A mesh kit usually passes your data from unit to unit over the air, and every wireless hop costs speed. An access point on its own cable doesn't relay anything over the air, so the one farthest from the router has the same wired connection back to the network as the nearest. How mesh and wired access points compare, with one house quoted three ways.

What it cost

We quoted the job at a fixed price in October 2026, cameras included. Two runs were later added to the job at the same $499 rate: the office nook line, and the garage link, which the quote had listed as an option. These are the networking lines from the job:

ItemPrice
Cat6 runs: one to each access point, one to the office nook and one linking the garage, each wired, sealed, tested and labeled$499 per run
Mounting the two access points$99 each
Setting up the router and the two access points$99 each
Two access points$455 each
Router and gateway$828.10
Network switch, which also powers the cameras$495.00
Network rack$194.74

The job also covered the cameras and a parts and tool-use charge for the whole job. Those lines aren't listed here, so this table has no total.

Want wired Wi-Fi in your West Linn home?

Tell us where the Wi-Fi drops off and what needs a wired connection. The first walkthrough is free, and the quote after it is a fixed price. We work Monday to Friday, 9 to 5, and usually reply within 24 hours.

Company Logo